Unitree Robotics is a Hangzhou company that designs and manufactures legged robots — both quadrupeds (robot dogs) and humanoid platforms — plus many of the motors, reducers, hands, LiDAR and sensors used inside them. Traders who can’t buy the company’s Shanghai STAR Market shares can gain long or short exposure to Unitree’s reference price via MEXC’s UNITREEUSDT perpetual futures contract. This article summarises verifiable company facts, explains how the MEXC contract works, and gives a practical checklist for traders considering exposure.
What Unitree makes and what is verified
Sources describe three product lines at Unitree: quadrupeds sold to universities, research labs and contractors; humanoid robots (G1, H1, H2, R1 series are mentioned in reporting); and vertically integrated components including motors, reducers, dexterous hands, LiDAR and sensors made in-house. Reporting cites specific price references: a baseline G1 humanoid priced at RMB 99,000 in one account and at $13,500 in another; an R1 consumer-intended robot priced at $4,900. These price points come from published reporting and Unitree’s own product positioning as described in prospectuses and press coverage.
On scale and financials, multiple reports attribute the following figures to Unitree (attributing where figures differ):
- Revenue around RMB 1.7 billion in 2025 (reported in sources summarising Unitree’s prospectus).
- Net income or profit figures vary by report: one source reports net income near RMB 280 million; another reports net income of 600 million yuan in 2025. The discrepancy is present in the sources and is reported here without reconciling the two.
- Unitree reportedly shipped roughly 5,500 humanoids in 2025 and cumulative quadruped sales above 30,000 units in one source.
- Gross margin figures near 60% are reported in multiple passages summarising Unitree’s filings.
Unitree completed an IPO on Shanghai’s STAR Market in August 2026 (the company’s listing and fundraising details are reported in the sources). One account gave an IPO price of 150.8 yuan per share and a valuation figure reported variously (for example, 61 billion yuan or other public-market valuations cited by different outlets). Reporting also notes founder Wang Xingxing retains controlling voting power through weighted-voting-rights shares.
What is UNITREEUSDT on MEXC?
MEXC lists UNITREEUSDT as a USDT‑margined perpetual futures contract that references Unitree’s share price. Important, verified characteristics from the reporting:
- UNITREEUSDT is a derivative — it is not the stock, conveys no ownership or claim on the company, and nothing settles into actual shares.
- The contract is perpetual: no expiry or delivery date, and it trades around the clock on MEXC rather than following Shanghai trading hours.
- Before a public market exists, MEXC derives a pre‑listing reference price from an estimated valuation and share count; the exchange warns that the notional and share count are indicative and may be adjusted once the actual share capital is confirmed.
- MEXC separates trading sessions into regular hours and a low‑liquidity period; during the low‑liquidity window slippage widens, index prices can pause, take-profit and stop-loss orders may go unfilled, and leverage on new orders can be reduced.
How to go long or short UNITREEUSDT — practical checklist
The published MEXC guide steps are straightforward; below is a trader checklist summarising the key operational steps and risk controls reported in the sources.
- Fund your futures account: transfer USDT from your spot wallet to the USDT‑M futures wallet.
- Open the UNITREEUSDT contract page on MEXC and confirm the instrument’s contract parameters (margin mode, maximum leverage, tick size and listing time). These are set by MEXC and visible on the contract page; they can change.
- Choose margin mode and leverage deliberately: compute how far the reference price can move against you before liquidation (for example, at 10x leverage a 10% adverse move would wipe margin).
- Select order type: limit orders for controlled entry price; market orders for immediate fills (accept slippage). During low‑liquidity periods expect wider spreads and execution uncertainty.
- Position sizing: decide absolute USDT exposure and ensure it fits your risk tolerance. Read MEXC’s sizing notes — because pre‑listing notional adjustments can change what each contract represents, keep position sizes conservative around the listing event.
- Set explicit stop‑loss and take‑profit levels and monitor funding rates for perpetuals; ensure automated risk orders are enabled and tested since stops can fail in thin markets.
- Understand settlement mechanics: as a perpetual, there is no delivery into shares; gains and losses are settled in USDT according to the contract’s funding and mark rules.
How this instrument differs from holding the stock
Per the sources, differences include:
- No ownership: the perpetual conveys price exposure only, not dividends or voting rights.
- Accessibility: the derivative allows non‑mainland investors to get exposure without a mainland brokerage account or meeting China’s investor thresholds for STAR Market trading.
- Ability to short: the perpetual enables short exposure without borrowing shares or accessing an onshore securities lending market, unlike direct stock markets where retail shorting is often restricted.
Risks and context traders must weigh
Combine product‑level, company and market risks reported in the sources:
- Technology and commercial adoption: multiple analysts quoted in coverage caution that humanoid robots are still early-stage, often used for research and demonstrations rather than broad industrial or household tasks.
- Regulatory and geopolitical risk: reporting notes U.S. import restrictions on foreign-made humanoid and four‑legged robots, and concerns about component access (e.g., Nvidia platforms) that could affect Chinese robotics firms.
- Reporting inconsistencies: sources disagree on certain financial figures (for example, net income), so traders should check the company’s official prospectus or audited filings for final numbers when sizing positions.
- Contract-specific risks: pre-listing reference price derivation and possible notional adjustments, round‑the‑clock trading with low‑liquidity sessions, and exchange‑level rule changes can all materially affect execution and P&L.
Original value — comparison table (evidence-normalised)
| Claim or metric | Source A | Source B |
|---|---|---|
| 2025 revenue | RMB 1.7 billion (reported from prospectus summaries) | ~RMB 235 million referenced differently in Forbes summary (note: Forbes cites $235 million equivalent) |
| 2025 net income / profit | Near RMB 280 million (one source) | 600 million yuan (The Motley Fool reports this figure) |
| Humanoid shipments 2025 | ~5,500 units (reported) | — |
| G1 price | RMB 99,000 (one report) | $13,500 (Ars/Forbes reporting converted) |
Note: the table reproduces numbers exactly as they appear in the reporting sources and highlights disagreements rather than reconciling them — traders should consult Unitree’s audited prospectus for definitive figures.
Bottom line for traders
UNITREEUSDT on MEXC is a liquid avenue for price exposure to Unitree’s reference share price without owning the stock, and it lets traders go long or short with leverage. The instrument carries exchange‑specific operational complexities (pre‑listing reference, notional adjustments, low‑liquidity sessions) and the usual derivatives risks (leverage, liquidation, funding). Separately, Unitree itself is presented in reporting as a cost‑focused, high‑volume Chinese robotics manufacturer with substantial humanoid shipments and profitable margins — but some source figures conflict. Anyone using MEXC’s contract should verify current contract parameters on MEXC’s site and cross‑check Unitree’s official prospectus or audited filings before making material trades.